Designed to reply to need of acquisition of the information, the electronic tensiometer STE 600 replies in all points to this objective.To make this and so as to guarantee the work of a machine without break, the constructor proposes various solutions to obtain a reliable instrument in difficults climatical conditions.
The temperature compensation, necessary on all devices running in the field, protects the tensiometer against all drifts caused directly by temperature gradients in field. The visual control of the measure undertaken by the tensiometer can prove very useful many times. One quick look allows you to know that all is well in your device.
Perfect measure of the hydric potential : by its position on the tensiometric tube, the STE 600 system presents an electrical reply that will not be in any way influenced by presence of air in the tensiometer. Indeed, the electronic collector is going to be perfectly saturated during the preparation of the tensiometer and its position will forbid it all give-back of water even if the tensiometer rest blocked on-900 @@hPa during several hours.
The trapping of a liquid in the cell of the BOURDON manometer allows your tensiometer to make a measure truly linked to the potential of the water in the ground and non of... the ambient temperature! This liquid contained in the manometer will not be extracted, what is a pledge of very important security.
Finally, the possibility for the user to connect this electronics tensiometer STE 600 on almost all DATALOGGERS available on the market or on your OWN DATALOGGER or laboratory datalogger. The OUTPUT of the electronics tensiometer STE 600 (0-100 mVolts) allows it to be present on all field experimentations.
MONITORING (by connection to a data logger)
Electronic sensor sensitive to frost & to overpressure (ex : if the operator pushes to hard on the silicone stopper)
Measuring range : 0 to -999 hPa.
Output : 4 wires, differential voltage (0 - 100 mV @ 10.00 volts excitation)
Current consumption : 2 mA with a direct current of 10,00 Volts.
Power supply : +6 to 15 VDC.
Input resistor : 7,5 Kohm.
Output resistor : 2,5 Kohm.
Accuracy : better than 1% of full scale.
Response time : 1 msec.
Offset : 0 ± 1,5 mV.
Hysteresis : 0,2% of full scale.
Maximum pressure accepted by the sensor :+1 bar (1000 HPa).
Shock tests : guaranteed for 150g (tested up to 800 g).
Stability after one year : 0,5% of full scale.
Temperature correction : -10°C to +50°C.
Storage temperature : -20°C to +60°C.
Operation temperature : -10°C to +50°C (under +5°C, add some antifreeze liquid).