STANDARD CERAMIC Ø 23 mm FOR TENSIONIC - SDEC 2200HC

APPLICATIONS

Managing nitrogen fertilizers, irrigation.
Soil water sampling for soil pollutants analysis.
Replacement of broken ceramic on the Tensionic tensiometer.
Polluted sites monitoring
Groundwater monitoring and protection against lixiviation

This ceramic is used on our Tensionic tensiometer device for it has a very thin wall, a high hydraulic conductivity and is made with a very special formula. It is sold with a plastic thread ring and a neoprene seal.

Air entry value : 1 Bar.
Very thin walls
Water flow : 50ml/h/cm2 at 15 PSI (1034 mbar)
Pore size : about 2,5 mm.
Hydraulic conductivity : 8.10-6cm.s-1 (*)
Weight : 50 gr. (With PVC screw piece.)
Dimensions (**) :
Outer diam. : 23,40 mm.
Total height : 89,80 mm.
(*) K is an average value calculated in a sample of 100 ceramics of the same type. (**) Tolerances on diameter
dimensions : ± 0,5 mm.