CARBON 14 SAMPLER WITH 2 VIALS (WITHOUT OVEN) - HAGUE 5000

This equipment is designed to capture CARBON gas (CO₂ or CO). It can be equipped with a cooling system that will prevent all sample loss due to evaporation in the feeding bottles.

A microprocessor pilots and manages all functioning parameters, insuring thus a total security in its utilization on long periods.

Functioning principle A flow of atmospheric air, precisely measured, flows through the HAGUE 5000 equipment. The Carbon 14 contained in this air as CO₂ gas is trapped in a soda solution or a scintilling liquid in two feeding bottles. Further spectrometry analysis are conducted in a laboratory.
The ratio between radionucleid quantity measured in the bottles and the quantitiy of absorbed air is used to calculate the C14 concentration.

Quality norm

IN COMPLIANCE WITH THE NF M60-812-1 NORM

Key advantages
1. EXCELLENT TRAPPING EFFICIENCY (close to 99%).
2. COOLING SYSTEM TO INCREASE SAMPLING LENGTH (option).
3. GOOD PRICE.
4. CONSTANT EVOLUTION OF THE PRODUCT.
5. EASY TO USE.
6. CONNECTABLE TO ALL SAMPLING LINES.

ELECTRICAL SPECIFICATIONS

Voltage requirement : 220 Volts. (±10%).
Power consumption : 300 Watts (700 Watts, with cooling system option).
Frequency voltage: 50 Hz (±10%).

Running fully piloted by microprocessor :
Airflow (from 10 to 55 liters/hour) and detection of tightness defect of bottles.
Heap of gases posted by the machine (until 25,000 m³).
Cooling system : +5°C to +15°C (depending on the ambient temperature).
Circulation of the cold liquid : automatic error detection.
Circulation pump of the cold liquid : functioning.

Alarm Buzzer for all defects detected.
Electrical output by : RS 232. (J.BUS system optional).
Electrical signal TOR card - alarm state relay (option).
Detection and identification of defects from a distance (via RS 232).
Differential circuit-breaker (cut current = 30mA).
Display : to crystals liquidate type matrical 2 lines of 16 characters.
Simultaneous display of:
Cold temperature .
Instantaneous airflow and volume accrued.
Duration of the trapping and alarm.
Resumption of running witnesses of the cold group by LED diode on front panel of HAGUE 5000 equipment.
Power consumption by the cold system: 400 Watts.

MECHANICAL SPECIFICATIONS

Monoshell BOX in alloy of aluminium.
Front panel in LEXAN anti-stripe material.
Box painted : special powder paint, seed look.
Main materials constituting the mechanical parts are: PVC, POLYACETAL, POLYAMID, NYLON, Alloy of Aluminium, STAINLESS Steel, brass nickel-plated.
Feeding-bottles in GLASS have a content of about 250 ml (the admissible height of the feeding bottle is between 169 and 172 mm).
Pump of air aspiration : 10 to 55 liters per hour.
Electronic airflow sensor (accurate= 1% calibrated).
Meadow-paper filter to the admission of air (= 45 mm).
Operating temperature : +2°C to + 45°C.
Storage temperature : -5°C to + 70°C.
Weight of the machine : without cold system option : 18Kg. With cold system option : 29 Kg.
Carriage : 3 handles system for comfortably transportation by 2 people.
Dimensions : Length= 580 mm, Height= 265 mm, Depth= 210 mm.

[**] Cooling system of water (optional) :
Pump of water circulation (2 liters per minute).
Cold system with condenser. Thermal dissipation insured by a turbine to air. Mini temperature obtained = +2°C to +30°C under ambient temperature or +9°C to +45°C under ambient temperature.
The water temperature plug of the feeding-bottles been made in the circuit of water Cold system.
The optional cooling system can be installed on standard SDEC France collectors.