STANDARD CERAMIC Ø 23 mm FOR TENSIONIC - SDEC 2200HC

This ceramic is used on our Tensionic tensiometer device for it has a very thin wall, a high hydraulic conductivity and is made with a very special formula. It is sold with a plastic thread ring and a neoprene seal.

Air entry value : 1 Bar.
Very thin walls

Water flow : 50ml/h/cm2 at 15 PSI (1034 mbar)

Pore size : about 2,5 mm.

Hydraulic conductivity : 8.10-6cm.s-1 (*)

Weight : 50 gr. (With PVC screw piece.)

Dimensions (**) :
Outer diam. : 23,40 mm.
Total height : 89,80 mm.

(*) K is an average value calculated from a sample of 100 ceramics of the same type.
(**) Tolerances on diameter dimensions : ± 0,5 mm.