BATTERY OPERATED FIELD ELECTRIC VACUUM PUMP - PAV 2000

Click on the pictures below to zoom (not available for all pictues on this website).



Used for collecting soil solution contained in SPS 200 succion lysimeters
Used for collecting soil solution contained in SPS 200 succion lysimeters
Home
September 4, 2010

LYSIMETERS 

Porous ceramic Lysimeters - The Standard

Porous stainless steel Lysimeters (for organics)

Porous PTFE / quartz Lysimeters (trace metals)

Porous polymer microsampler - RHIZON

Vacuum pumps
Self driven electric vacuum pump - PAV 2000
Manual vacuum pump with manometer - SPS 400




Other views


ACCESSORY FOR
Make the vacuum into the soil solution samplers (ref. SPS 200).
Preparation of tensiometer tubes (ref. SMS 200, ref. STM 2150, ref. TENSIONIC, etc).
All applications where a fast vaccum is required


BATTERY OPERATED FIELD ELECTRIC VACUUM PUMP - PAV 2000


Thanks to a new design, this self driven electric vacuum pump will give you an incomparable comfort in your field experimentation when you work on soil solution sampling.
The PAV 2000 vacuum pump is very light and has a very high electrical autonomy. Field engineers are thus really helped for vacuum making into all their lysimeters (type SPS 200). Because we use a very high quality vacuum pump, the vacuum obtained in extractor tubes is achieved in less than 15 seconds in extractor tube (average length : 75 cm). This device allows very fast actions on the field, increasing significantly the efficiency and decrease the operator's tiredness.

Key Advantages

LIGHT
HIGH ELECTRICAL AUTONOMY

TECHNICAL CHARACTERISTICS

Vacuum : to 250 mbar, i.e -750 mbar of relative vacuum (by convention, the atmospheric pressure is defined as zero mbar).

Battery : 12 Volts - 5 A/Hour, head / acid sealed type (waterproof, without maintenance).

Integrated battery charger : a battery charger, intelligent type is integrated in the enclosure. The change is done by simple connection on mains (220V-50Hz).

Charging time : about 7 hours.

Charge indicator : by L.E.D with 3 colors. RED, ORANGE or GREEN for level charge indicator. As the charge is done by current, this one can be done at any time without dammage for the battery.
The battery charger will give only what the battery needs to be fully charged.

Number of charge/discharge cycles : About 400 before battery replacement.

Vacuum braker valve : used to protect the manometer, this system open enables the operator to gently break the vacuum.

Vacuum manometer : BOURDON tube type with internal mecanical brake. (0 ; -1bar)
Accuracy : 1,60%

Filter : Inside the device, there is a special filter (GORETEX) to prevent the water penetration into the vacuum pump.

Weight : 5 kg

Enclosure : chassis shell type in aluminum.

Front panel : made of aluminiumwith Lexan cover (easily etachable for filter replacement).

Dimensions : 200 x 130 x 240 mm (L x w x h)

Diameter of Air pipe inlet : 8 mm

3 position switch : battery charge / Off / On

Electrical autonomy : about 5 hours in continuous running : vacuum obtained into 350 lysimeters, SPS 200 type / Ø:63mm & Length:50cm.
In field conditions this vacuum pump is appropriated for one day work (12 hours) or 2 day works (6 hours).
This electrical autonomy is doubled if lysimeters are 31mm diameter.

Weather protection : IP.

 

 

 

 

 

 

 

 


Download brochure
Download brochure

Vacuum pump (battery operated)

Ask for a quotation
PAV 2000 Qty 
SPS lysimeter Ø 63mm
Length (instal. + 5cm)  Qty 
SPS lysimeter Ø 31mm
Length (instal. + 5cm)  Qty 
Collecting bottle 1L. SPS 300



The standard set

The PAV 2000 vacuum pump is delivered complete with its battery, integral battery charger and mains lead



SDEC France
Z.I de la Gare
 BP 27 Reignac sur Indre
37310 Tauxigny
France
Ph : +33 2 4794 1000
Fax : +33 2 4794 1713
e-mail : click here




màj: 01-Jul-2010 | Mentions légales | © SDEC France 2003 - 2010

Powered by CROISIX